parkettkoll flot d3
(unit price)
Parkettkoll Flot D3 is a high-quality Italian adhesive designed for bonding the groove and tongue joints of laminate, engineered wood, and pre-finished parquet. It provides a durable, moisture-resistant connection for all types of floating floors.D3 Water Resistance: Protects joints from moisture and humidity, preventing floor swelling.Transparent Finish: Dries completely clear, ensuring invisible and clean joints.Strong & Flexible Bond: Stabilizes the floor planks while allowing for natural micro-movements.Easy Application: Designed for precise and mess-free application in the grooves.Eco-Friendly: Water-based formula, solvent-free, and safe for indoor use.Made in Italy: Guaranteed premium quality and performance.
Surface Preparation:
Ensure that the floor grooves are clean and free from dust or sawdust.
Applying the Glue:
Apply the glue in an even layer along the entire length of the plank's groove. Applying it only to the upper part of the groove is sufficient, as it will fill the entire space upon connection.
Connecting the Planks:
Join the planks and press them firmly together. If applied correctly, a small amount of glue should squeeze out at the seam—this indicates that the groove is completely filled and protected from moisture.
Removing Excess Glue:
Immediately wipe away any squeezed-out excess glue with a damp (not wet) cloth. It is crucial not to let the glue dry on the surface, as it becomes much harder to remove once cured.
Waiting Period:
It is recommended to wait 24 hours before walking on the floor to allow the glue to fully harden.
- Production: Italy
- Drying Time: Initial grip in 15-30 minutes, full curing in 24 hours.
- Consumption: Approximately 10-15 grams per linear meter (depending on the depth of the groove).
- Working Temperature: From +10°C to +30°C
You may also like
